User Guide User guide

H
RS-232 remote — 3-pole, 3.5 mm captive screw connector for a host computer
or a controller using Simple Instruction Set (SIS) or Windows-based control software
commands.
An IP Link driver allows Extron IPL and MediaLink devices to control the MPS601 from
the RS-232 remote connector.
Ground (G)
Receive (Rx)
Transmit (Tx)
Bidirectional
RS-232
Device
Ground (G)
Receive (Rx)
Transmit (Tx)
RxTx G
Do not tin
the wires!
Figure 6. RS-232 Connector Wiring
c
USB configuration port (front panel) — (see Front Panel Features on page11)
Female USB mini-B jack used for configuration of the switcher and firmware upgrades
(see Updating Firmware on page47).
Contact Closure and Tally Output Application Diagrams
The following diagrams show examples of various connections using the contact enclosure
and tally output feature of the MPS601.
-- A MAX
POWER
12V
1
2
B
A
3
4
5
6
INPUTS
MPS 601
CONTACT IN / TALLY OUT
HDMI
RGBHV
HDMI
HDMI
RS-232
GC
135
246
TTCG TCG
GCT TCG T
+V
CG
Tx Rx G
OUTPUT
REMOTE
VGA/HDMI “Show Me” Cables
MPS 601
Display
Contact
Closure
and Tally
HDMI Video and
Embedded Audio
Figure 7. Contact Closure Application Diagram with Show Me Cables
MPS601 • Installation 7