User Guide User guide
2. If the disc does not start automatically, run LAUNCH.EXE from the disc.
3. Follow the instructions that appear on the screen.
By default, the installation creates a C:\Program Files\Extron\DSP_
Configurator directory and places a shortcut icon in it.
NOTE: During initial installation, the user is asked if they wish to install the USB
drivers or not. You should accept the installation, as these drivers are essential
for connecting to a PC or control device via the front panel mini USB port of
the MLS 608 D unit.
Installation from the Website
1. On the Extron website (www.extron.com), select the Download tab.
2. On the Download Center screen, select Software from the left side-bar menu.
3. Locate the DSP Configurator program file from the list and click on it.
4. Follow the on-screen instructions to download the program to your PC.
Starting the DSP Congurator
Click Start > Programs > Extron Electronics
> DSP_Configurator > DSP Configurator.exe.
Alternatively, if an icon was installed on the desktop, double-click
the icon to start the DSP Configurator program.
The device selection window appears.
5. Select the appropriate device from the drop-down list and click OK.
NOTE: To exit without starting the program, click Cancel.
DSP Congurator opens to the default Audio & Video I/O workspace, in Emulate mode
(see figure on next page). This workspace is a blank configuration for the selected
device.
NOTE: The green box in the top right corner of the workspace identifies the current
mode, “Emulate” or “Live.”
MLS 608 D Series • DSP Congurator 45