Installation User guide

5-19
MLC 226 IP Series • SIS Programming and Control
PRELIMINARY
Command/response table for SIS commands (continued)
Command ASCII (Telnet)
(host to switcher)
URL Encoded (Web)
(host to switcher)
Response
(switcher to host)
Additional description
Query updated fi rmware version 4Q 4Q
X1!
(kernel version–model description–date time of upload)
]
or Ver04*
X1!
(kernel version–model description–date time of upload)
]
Use this command to fi nd out which version
of the fi rmware, if any, was uploaded into
the controller after it left the factory
Example:
4Q 4Q
1.01*(1.31-MLC226 -Mon, 28 Feb 2005 23:16:55 GMT)
]
In this example the current fi rmware version
is 1.01, the IP Link kernel version is 1.31, for
the MLC 226 IP, dated 28 February, 2005.
Query FPGA version 32Q 32Q
X1! ]
Show the fi eld-programmable gate array
(FPGA) fi rmware version to two decimal
places (x.xx).
Request the MLC’s part number N N
60-600-00
]
60-818-00
]
or Pno60-600-00
]
60-818-00
]
Show the MLC’s part #.
Request A/V input number I I
Chn
X20) ]
Show which input is active (selected).
X20)
is the input number. The MLC
responds with an E14 error if no input
buttons are set up for fi rmware control
(input switching).
Request the model name 1I 1I
MLC 226 IP
]
or Inf01*MLC 226 IP
]
MLC 226 IP
Request the model description 2I 2I
MLC 226 w/ IP
]
or Inf02*MLC 226 w/ IP
]
MLC 226 with IP control.
Request system memory usage 3I 3I
# bytes used out of # of kbytes
]
or Inf03*# bytes used out of # of kbytes
]
Show amount of memory used and total
available memory for system operations.
Request user memory usage 4I 4I
# bytes used out of # of kbytes
]
or Inf04*# bytes used out of # of kbytes
]
Show amount of user memory used and
total available user memory.
Example:
4I 4I 217856 Bytes Used out of 7232 KBytes