Installation User guide

4-29
MLC 226 IP Series • Software-based Confi guration and Control
PRELIMINARY
GlobalViewer
™
Web Pages
The MLC 226 IP controller can be used as part of a network of devices based on
Extron IP Link
™
technology, such as IP Link interfaces. Global Confi gurator (GC) is
a Windows-based program used for confi guring and customizing the Web browser-
based GlobalViewer (GV) application for each IP Link interface, System 5 IP,
MLC 226 IP, MLC 104 IP Plus, or other IP Link-based device on a network. Once an
MLC 226 IP is confi gured, its GlobalViewer Web pages allow the user to manage,
monitor, and control the MLC and the devices connected to it.
Refer to the Global Confi gurator help fi le and the MLC 226 IP Series Setup Guide for
specifi c information on how to use the software and perform basic setup tasks for an
MLC 226 IP.
N
To work with Global Viewer Web pages, you must use Microsoft Internet Explorer
version 6.0 or higher with Active X enabled.
N
If the MLC has been confi gured with passwords, the GlobalViewer Web pages are
password protected. Although default embedded Web pages are accessible via the
GlobalViewer Web pages, nonadministrators (people with only user access) are
able to access the Control and Status pages only.
Four screens for the MLC are available via Global Viewer: Control, Monitor,
Schedule, and Info (
). These screens
are described on the following pages.