Installation User guide

4-13
MLC 226 IP Series • Software-based Confi guration and Control
PRELIMINARY
• miscellaneous settings, including whether to reset button statistics or upload the
enhanced Web pages when the confi guration is uploaded to the MLC
Display power up/power down settings (Power Settings)
All the settings in this section affect what happens during display power on/up
and power off/down cycles.
Auto shut-off period — This feature at the top of the Power Settings area lets you
set the length of time that
the display or projector can
be inactive before the MLC
automatically turns it off.
Settings can be 30 to 720
minutes or -- (0).
I/O switching delay
periods — The second
item in this area controls
whether and how long to
prevent (lock out) input
switching after an input
has been switched. This
delay can be set to 0 to 5
seconds in half-second intervals, and it is similar to special SIS command 54# on
page 5-40.