Installation User guide

Operation, cont’d

MLC 226 IP Series • Operation

3-8

PRELIMINARY

Using the Web pages

1. Using a Web browser, enter the MLC’s IP address and open the MLC’s

embedded Web page. If an administrator password has been set and if you

are prompted to do so, type in the administrator password.

2. Click on the Configuration tab, which opens to the System Settings page.

3. Select either Off or Disable Front Panel, SCP, Control Modules and IR in the

Executive Mode settings area. See the following picture.

If Disable Front Panel, SCP, Control Modules and IR is selected via the

System Settings factory default Web page, front panel lockout can’t be enabled/

disabled via the front panel unless PIN Mode is enabled. See pages 5-39 to 5-40

to ﬁ nd the SIS commands for PIN enabling/disabling.