Installation User guide

Index, cont’d
MLC 226 IP Series • Index
C-4
PRELIMINARY
M
main event fi le (0.evt) 4-25
miscellaneous settings (SIS commands) 5-39
MLC-initiated messages 5-2
MLC 226 IP
cut-out template A-10
MLC 226 IP L 2-18
rack mounting 2-18
modes, reset 2-15
Monitor
GlobalViewer Web page 4-31
mounting
electrical box 2-17
Euro Channel 2-19
mud ring 2-17
rack 2-18
wall or furniture 2-18
mud ring, mounting to 2-17
N
National Electrical Code (NEC) 2-17
P
passwords
MLC’s responses 5-3
prompts from MLC 5-3
requirements for 4-23
Passwords embedded Web page 4-23
personal identifi cation number (PIN)
enable PIN (SIS command_ 5-40
pinout guide 2-15
power connection status
as indicated in GlobalViewer 4-34
projector control 3-2
power connection status in GlobalViewer 4-34
R
rack mounting 2-18
reset (zap) commands and erase commands (SIS) 5-33
Reset button 2-15
Reset Device After Firmware Update B-7
reset (zap) commands and erase commands (SIS) 5-33
reset modes 2-15
resetting the unit
reset (zap) commands and erase commands (SIS) 5-33
Reset Device After Firmware Update B-7
resetting the MLC and restoring its confi guration after a
fi rmware update B-9
RS-232 protocol 5-2
S
Schedule (GlobalViewer Web page) 4-32
scheduling
front panel lockout periods 6-14
sending e-mail by pressing a button 6-14
serial devices’ drivers 4-27
SIS programming and control 5-1
slave map 5-38
slave switcher.
See auxilliary switcher
system requirements 1-3
System Settings (GlobalViewer Web page) 4-22
T
tree view area in GlobalViewer Web pages 4-30, 4-33
U
UL requirements 2-17
UL rack mounting requirements 2-19
unit name
defi nition and parameters 4-22
updating the main fi rmware B-4
User Mode (embedded Web page) 4-26
V
volume
control via front panel knob 3-4
encoder scaling 4-14
max. volume range (SIS command) 5-39
volume settings in Global Confi gurator 4-14
volume adjustment
encoder scaling 4-14
max. volume range (SIS command) 5-39
via front panel knob 3-4
W
wall or furniture mounting 2-18
wiring block diagram
printing 4-18