Installation User guide

MLC 226 IP Series • Index
C-2
Index
PRELIMINARY
Index
A
accessories, part numbers for A-6
actions
enabling and disabling in GlobalViewer 4-32
advanced confi guration
options in Global Confi gurator 4-12
ASCII to decimal conversion table 5-13
ASCII to hex conversion table 5-4
audio level, limiting on power-up
SIS command 5-34
audio settings, SIS commands for
limit audio level on power-on 5-34
auxiliary port.
See MLS RS-232 (slave switcher) port
See auxilliary switcher
See also RS-232 protocol
auxilliary switcher
confi guring 4-16
enable slaving (SIS command) 5-39
B
button press/release emulation 5-36
buttons
associations with IRCM-DV+ 5-35
button control SIS commands 5-38
button press repeat commands 5-38
default SIS commands for input buttons 3-4
front panel button LED control 5-39
press/release emulation (SIS commands) 5-36
slave map (button associations for a slaved
switcher) 5-38
types, functions, and operation 3-2
virtual mapping for an IRCM-DV+ 5-35
C
cdc fi les 4-25
Confi guration
embedded Web page 4-22
confi guration
saving and uploading 4-18
confi guration ports
Confi g (host control) port 3-6
connector pin assignments 2-15
Control
embedded Web page 4-26
GlobalViewer Web page 4-30
controlling the MLC 4-19
controlling two display devices 6-11
control modules
overview 3-6
copyright message
sent by the MLC 5-2
custom GUI service 4-34
customizing control Web pages 4-34
cut-out templates A-10
MLC 226 IP A-10
D
defaults
IP addresses 5-2
LAN port 2-14, 5-2
delay times, SIS commands for 5-34
device drivers
serial
viewing in embedded Web page 4-27
digital I/O port
settings in Global Confi gurator 4-15
display (projector) power
advanced settings in Global Confi gurator 4-13
power connection status in GlobalViewer 4-34
display control 3-2
E
e-mail
sending by pressing a button (special application) 6-14
eir fi le type A-9
electrical box, mounting to 2-17
electrical box or mud ring, mounting to 2-17
Email Alerts
embedded Web page 4-23
embedded Web pages
accessing 4-19
Confi guration 4-22
Control 4-26
IR drivers 4-27
Email Alerts 4-23
File Management 4-24
Firmware Upgrade 4-24
IR drivers 4-27
Statistics 4-21
Status 4-20
Statistics 4-21
System Status 4-20
updating fi rmware via B-4
User Mode 4-26
enhanced Web pages example 4-26
eml fi le type A-9
enable PIN 5-40
SIS command 5-40
encoder scaling 4-14
enhanced Web pages
example 4-26
error responses to SIS commands 5-3
event fi les 4-25
.evt fi les A-9
main event fi le (0.evt) 4-25
evt fi les A-9