Installation User guide

SIS
™
Programming and Control, cont’d
MLC 226 IP Series • SIS Programming and Control
5-28
PRELIMINARY
Command/response table for SIS commands (continued)
Command ASCII (Telnet)
(host to switcher)
URL Encoded (Web) (host to switcher)
Response (switcher to host)
Additional description
Read/view e-mail events
E
X4%
CR
}
W
X4%
CR
| X4^
,
X4&
]
Send e-mail fi le specifi ed in the e-mail event confi guration
24
E X4%
SM
}
W
X4%
SM
|
Eml
X4%
] X4%
= e-mail event number (1 - 64).
Send a different e-mail fi le (one not confi gured in an e-mail event)
24
X7)
= The number to insert into an e-mail
message if a ____.eml fi le has an embedded server-side include “<!--#echo var = “WCR
|
” -->” (the
E}
command with
no parameters.) The numeral is a 16-bit number to be employed as the user defi nes. This is an optional parameter. Use 0 as a placeholder if the optional
X4&
variable is
used but
X7)
is not needed.
X4&
= xxx, where xxx = a number 1 to 999
corresponding to the e-mail’s fi lename (xxx.
eml). If xxx = 0 or no parameter is given, the MLC sends the fi le that was set via the CR command.
E X4%
,
X7)
,
X4&
SM
}
W
X4%
%2C
X7)
%2C
X4&
SM
|
Eml
X4%
]
N
If fi le
X4&
.eml is not found when the SM command is executed, the MLC sends a default e-mail message.
Set e-mail server IP address and user domain name
24
X1$
= IP address (xxx.xxx.xxx.xxx). Leading
zeros are optional in setting values. Leading zeros are suppressed in returned values. X1%
= E-mail domain name, e.g., extron.com
X7#
= An e-mail account username (for
SMTP authentication) of up to 31 characters. Do not use commas. This parameter is optional during setup.
X7$
= An e-mail account password (for
SMTP authentication) of up to 31 characters. Do not use commas. This parameter is optional during setup. In a response, instead of the actual password,
X7$
is
displayed as 4 asterisks (****) if a password has been set up or as nothing ( ) if it has not.
E
X1$
,
X1%
,
X7#
,
X7$
CM
}
W
X1$
%2C
X1%
%2C
X7#
%2C
X7$
%2C CM
|
Ipm•
X1$
,
X1%
,
X7#
,
X7$
]
Read/view e-mail server IP address and user domain name
E
CM
}
W CM
| X1$
,
X1%
X7#
,
X7$]