Installation User guide

5-23
MLC 226 IP Series • SIS Programming and Control
PRELIMINARY
Command/response table for SIS commands (continued)
Command ASCII (Telnet)
(host to switcher)
URL Encoded (Web) (host to switcher)
Response (switcher to host)
Additional description
Get a connection listing
E
CC
}
WCC
|
[total number of client connections]
]
or
Icc [total number of client connections]
]
Example:
E
CC
}
WCC
|
002
]
Example: This shows two client connections.
Set the broadcast mode
24
E
X6$
,
X1$
EB
}
W
X6$
%2C
X1$
EB
|
Bmd
X6$
,
X1$
]
This command details how often and to what subnet work the MLC broadcasts a message. X6$
= Broadcast repetition interval in
seconds (0 to 255 [4.25 minutes], default = 0 = off). X1$
= IP address (xxx.xxx.xxx.xxx). Leading
zeros in each of four fi elds are optional in setting values, and they are suppressed in returned values. Default broadcast address: 255.255.255.255.
Set the broadcast mode to the default address
24
E
X6$
EB
}
W
X6$
EB
|
Bmd
X6$
,255.255.255.255
]
Clear the broadcast mode
24
E
0 EB
}
W 0 EB
|
Bmd 000,255.255.255.255
]
This command sets the repeat interval to zero, turning off the broadcast mode.
View the broadcast mode
E
EB
}
W EB
| X6$
,
X1$
]
Password and security settings
Read connection’s security level
E
CK
}
WCK
| X5@
]
or
Pvl
X5@ ]
For
X5@
11 = user 12 = administrator
Set administrator password
24
E
X3#
CA
}
W
X3#
CA
|
Ipa•
X4!
]
Set the administrator access password (
X3#
, 4 to 12 alphanumeric characters).
The password is case sensitive. Special characters (spaces, symbols) are not allowed.
X4!
= Password to display on
screen (response to password query). When the MLC connects to a host device via RS-232, the password (
X3#
), itself, is the
response. When the connection is via IP,
X4!
is 4 asterisks (****) if a password has
been assigned, or it is an empty fi eld ( ) if a password hasn’t been assigned.