Instruction Manual

5-29MLC 104 Series • SIS
™
Programming and Control
PRELIMINARY
Command/response table for SIS commands (continued) Command ASCII (Telnet) URL Encoded (Web) Response Additional description
(host to switcher) (host to switcher) (switcher to host)
Button LED control
Esc
X212
LC W
X212
LC
|
Lse
X212
This command specifies which front panel buttons (Power On, Power Off, Function/ Room, and/or input selection buttons) light and in what colors. You can change the lighting of one, several, or all buttons at once.
X212
= an 8-digit hexadecimal number
representing the status of button lamp LEDs.
Binary bit map for button LED status
Power On
Power Off
Input 4
Input 3
Input 2
Input 1
00##000#
XXXXXXXX
Convert
binary to
hexa-
decimal.
00##000#
LC
Insert
number
into
command.
Esc
Hex Nibble Hex Nibble
XXXX000000000000
Hex Nibble
0
Hex NibbleHex Nibble
0
Hex Nibble
0
Add 2 leading zeros to
the numbers from the
6 hex nibbles for a
total of 8 characters.
Control bits (XX) 00 = off – no LED is lit, button is unlit 01 = green LED lights
10 = red LED lights
11 = both LEDs light, button is amber
Power On
Power Off
Input 4
Input 3
Input 2
Input 1
009F000B
11111001
Convert
to hex.
009F000B
LC
Esc
Hex Nibble
9
Hex Nibble
F
1101000000000000
Hex Nibble
0
Hex Nibble
B
Hex Nibble
0
Hex Nibble
0
Add 2 leading
zeros.
Insert number
into command.
Example
Light buttons: • Power On = amber • Power Off = red • Inputs 1, 2 = amber • Input 3 = green • Input 4 = red
MLC 104 IP Front Panel
CONFIG
PROJECTOR
VOLUME
ON
VIDEO
AUX
VIDEO
PC
IMAGE
MUTE
OFF
1 2 3 4