Instruction Manual

5-21MLC 104 Series • SIS
™
Programming and Control
PRELIMINARY
Command/response table for SIS commands (continued) Command ASCII (Telnet) URL Encoded (Web) Response Additional description
(host to switcher) (host to switcher) (switcher to host)
Set administrator password
24
Esc
X33
CA W
X33
CA
|
Ipa•
X41
Set the administrator access password (
X33
,
4 to 12 alphanumeric characters). The password is case sensitive. Special characters (spaces, symbols) are not allowed.
X41
= Password to display on
screen (response to password query). When the MLC connects to a host device via RS- 232, the password (
X33
), itself, is the
response. When the connection is via IP,
X41
is 4 asterisks (****) if a password has been assigned, or it is an empty field ( ) if a password hasn’t been assigned.
Clear administrator password
24
Esc
•CA W%20CA
|
Ipa• Clear/remove all passwords (administrator
and user).
A user password cannot be assigned if an administrator password does not exist. Also, if the administrator password is cleared, the user password is also cleared.
Read administrator password
Esc
CA WCA
|
X41
Set user password
14, 24
Esc
X33
CU W
X33
CU
|
Ipu•
X41
Set the user password (
X33
is 4 to 12
alphanumeric characters). The password is case sensitive. Special characters (spaces, symbols) are not allowed.
X41
= Password
to display on screen.
A user password cannot be assigned if an administrator password does not exist. Also, if the administrator password is cleared, the user password is also cleared.
Clear user password
24
Esc
•CU W%20CU
|
Ipu• This clears the user password only.
Read user password
Esc
CU WCU
|
X41