User guide

SIS
™
Programming and Control, cont’d
MLC 104 Plus Series • SIS Programming and Control
4-18
PRELIMINARY
Command/response table for SIS commands (continued)
Command ASCII (Telnet)
(host to MLC)
URL Encoded (Web) (host to MLC)
Response (MLC to host)
Additional description
Query updated firmware version 4Q 4Q
X1!
(kernel version–model description–date time of upload)
]
or Ver04*
X1!
(kernel version–model description–date time of upload)
]
Use this command to find out which version of the firmware, if any, was uploaded into the controller after it left the factory
Example:
4Q 4Q
1.01*(1.65-MLC104IP -Thu, 28 Jun 2007 00:35:39 GMT)
]
In this example the current firmware version is 1.01, the IP Link kernel version is 1.65, for the MLC 104 IP Plus, dated 28 June, 2007.
N
Responses to commands differ depending on which, if any, verbose response mode the MLC is in. See the CV command (
E
X2@
CV
}
) under IP setup commands later in this
table.
Query FPGA version 32Q 32Q
X1! ]
Show the field-programmable gate array (FPGA) firmware version to two decimal places (x.xx).
Request the MLC’s part number N N
60-818-00
]
or 60-1014-00
]
or Pno60-818-00
]
or Pno60-1014-00
]
Show the MLC’s part #. IP models respond with 60-818-00, the MLC 104 Plus shows 60-1014-00.
Request A/V input number
14
I I
Chn
X20) ]
Show which input is active (selected). X20)
is the input number.
N
The MLC responds with an E14 error if no input buttons are set up for firmware control (input switching).
Request the model name 1I 1I
MLC 104 IP PLUS
]
or
Inf01*MLC 104 IP PLUS
]
MLC 104 IP Plus.
Request the model description 2I 2I
MLC 104 IP PLUS
]
or
Inf02*MLC 104 IP PLUS
]
MLC 104 IP Plus.
Request system memory usage 3I 3I
# bytes used out of # of kbytes
]
or Inf03*# bytes used out of # of kbytes
]
Show amount of memory used and total available memory for system operations.
Request user memory usage 4I 4I
# bytes used out of # of kbytes
]
or Inf04*# bytes used out of # of kbytes
]
Show amount of user memory used and total available user memory.
Example:
4I 4I 217856 Bytes Used out of 7232 KBytes
Request status of attached hardware
32I 32I
P1##•P2##•K1##•K2##•K3##•K4##•S
]