User guide

B-9
MLC 104 Plus Series • Firmware Updates
PRELIMINARY
Resetting the MLC and restoring its configuration
After a firmware update you must reset the unit. Resetting the MLC also removes
configuration information, so replace the MLC’s configuration after resetting.
1. PerformaZYreset,whichisanabsolutesystemresetexcluding IP settings (IP
address, subnet mask, gateway IP address, unit name, DHCP settings, port
mapping). This allows you to maintain communication with the MLC.
• If using Telnet or HyperTerminal, enter
E
ZY
}
.
•
IfusingaWebbrowserconnection,enterWZY
|
.
2. Using Global Configurator, restore (build) the previously saved project to the
MLC.