User Guide User guide

MGP Pro Series • Remote Configuration and Control 51
Command and Response Table for MGP Pro SIS Commands
Command
ASCII (Telnet)
(Host to Processor)
Response
(Processor to Host)
Additional Description
Input Selection
Select an input
X!
*
X@
! Out
X@
•In
X! ]
Select input source
X!
for
window
X@
.
View input
X@
!
X! ]
View the input channel for the
selected window.
X!
= 1-19.
X@
= 0-4. 0 = all windows.
Input Video Type
Set video type
X!
*
X#
\
X!
Typ
X# ]
Set input
X!
to format
X#
.
For
X#
:
1 = RGB
2 = YUV-HD
3 = RGBcvS
4 = YUVi
5 = S-video
6 = Composite video
7 = HDMI or 3G/HD-SDI.
View video type
X!
\
X# ]
View video signal type
X#
for
input
X!
.
NOTE: It is recommended that virtual inputs be configured using the Windows-based control software (see the software
help file for the procedures).
EDID Resolution and Refresh Rate
Set input EDID resolution and
rate
E
A
X(
*
X1^
EDID
}
Edid A
X(
*
X1^ ]
Set EDID resolution to scaler
resolution
X(
and the refresh
rate to
X1^
.
NOTE: All input EDID resolutions have available refresh
rates of 50 Hz and 60 Hz only except:
• 576p has 50 Hz only.
• 480p, Sharp 1080p, and 1080p CVT have 60 Hz
only.
For
X(
:
0 = Match output 14 = 1600x1200
1 = 640x480 15 = 480p
2 = 800x600 16 = 576p
3 = 852x480 17 = 720p
4 = 1024x768 18 = 1080i
5 = 1024x852 19 = 1080p
6 = 1024x1024 21 = 1280x800
7 = 1280x768 22 = 1360x768
8 = 1280x1024 23 = 1440x900
9 = 1360x765 24 = 1680x1050
10 = 1365x768 25 = 1080p Sharp
11 = 1366x768 26 = 1920x1200
12 = 1365x1024 27 = 1080p CVT
13 = 1400x1050 28 = 2048x1080
99 = Custom.
For
X1^
:
1 = 50 Hz
2 = 60 Hz.
NOTES:
• The default is to match the output resolution:
X(
= 0,
X1^
= 0.
• EDID resolutions are available only at 50 Hz and 60 Hz. If another rate is selected, the MGP Pro issues an E13 code.
View EDID resolution and rate
E
A EDID
} X(
*
X1^ ]
View current EDID resolution
X(
and rate
X1^
.
Save EDID
E
S 0EDID
}
Edid S 0
]
Save the EDID from the
connected output to Custom
EDID location 99.