Instruction Manual

4-29
MGP Series • Software Conguration and Control
PRELIMINARY
Command/response table for IP SIS commands (continued)
Command
ASCII (Telnet)
(host to processor)
URL Encoded (Web)
(host to processor)
Response
(Processor to host)
Additional description
Firmware version requests (continued)
Query updated rmware version 4Q 4Q
X1!
(plus web ver.-desc-UL date/time)
]
Use this command to nd out which version
of the firmware, if any, was uploaded into
the unit after it left the factory.
X1!
= firmware version to two decimal
places.
With tagged response – verbose modes 2 and 3:
Ver04 *
X1!
(plus web ver.-desc-UL date/time)
]
Example:
4Q
Q
4Q 2.02 * (1.66–MGP464 Series –Mon, 14 Jan 2008 17:03:46 GMT
In this example, the factory firmware version
is 2.02, also known as kernel version 1.66, for
MGP 464, dated 14 January, 2008, at 5:03 and
46 seconds p.m., Greenwich mean time.
Information requests
Request unit part number N N
60-771-xx or 60-1023-xx
]
Show unit part number.
MGP 464 is 60-771-xx;
MGP 462xi is 60-1023-xx.
For xx:
01 = standard model
02 = DI model
03 = HD-SDI model
With tagged response – verbose modes 2 and 3:
Pno 60-771-xx or Pno 60-1023-xx
]
Request model name 1I 1I MGP 464, MGP 464 DI, or
MGP 464 HD-SDI; or
MGP 462xi, MGP 462xi DI,
or MGP 462xi HD-SDI
Show unit model name.
With tagged response – verbose modes 2 and 3:
Inf01 * MGP 464 or Inf01 * MGP 462xi
Request model description 2I 2I Four or Two Window Multi-Graphic Processor
Show type of unit.
With tagged response – verbose modes 2 and 3:
Inf02 * Four or Two Window Multi-Graphic Processor