Instruction Manual

Operation, cont’d
MGP Series • Operation
3-16
PRELIMINARY
Curtain wipe — A curtain wipe causes the new window to appear to unroll over
the other one in one of two ways:
• In from the left and right edges to the center of the window
• Out from the center to the right and left edges of the window
A curtain wipe can have a soft (fuzzy) or a hard (sharp) leading edge.
Effect Duration submenu
Use this submenu to set the amount of time the MGP 464 takes to complete
a transition effect. Select from durations ranging from 0.0 to 5.0 seconds, in
0.1 second increments. (Duration is not available with the cut effect.)
To set an effect duration,
1
. Press the Menu button repeatedly until Window Conguration is displayed
on the LCD screen.
2
. Press the Next button until Effect Duration is displayed.
3. Rotate either the horizontal Adjust (
[
) or the vertical Adjust ({) knob to
select an effect duration.
Background Capture menu
The Background Capture menu allows you to capture the image currently on the
output screen and save it as a bitmap (.bmp) le with one of 16 designated image
names. You can then recall the image and use it as a background.
Background Capture also can be done via the Windows-based control software (see
“Windows
®
-based Control Software” in chapter 4, “Software Conguration and
Control”).
Window
Configuration
Background
Capture
Menu
Save Bkgd to Mem
none
Recall Bkgd Mem
none
Save Bkgd to mem
Saving Busy!!!
Next
Use either Adjust knob
to select a background.
Next
Recalled
Recalling
[Detail] = Confirm
Next
Save current image
as a background
Select a name for the
background file being
saved: bkg01.bmp
through bkg16.bmp
Next
Recall a background
Image from memory
Select an image
file name to recall for
use as background.
Detail
If None is selected
Background Capture menu flow