Instruction Manual

Operation, cont’d
MGP Series • Operation
3-12
PRELIMINARY
Output Conguration menu
The Output Configuration menu allows you to set output resolution, refresh rate,
output signal type, and sync polarity. The following flow diagram shows the
Output Configuration submenus and the adjustments that can be made from them.
Output
Configuration
Next
Resol 1024 x 768
Refresh @60 Hz
Output Type
RGBHV
Sync Polarity
H – V –
Next
Next Next
Input
Configuration
Menu
Resolution Refresh rate
See the table on the next page for
available combinations of
resolutions and refresh rates.
Default: 1024 x 768 @60 Hz
Video signal types
• RGBHV (default)
• RGBS
• RGsB
• YUV Bi-Lvl (Current NTSC standard)
• YUV TriLvl (Current HDTV standard)
Polarity combinations
• H
– V – (default)
• H
– V +
• H + V
–
• H + V +
• na*
*Appears when YUV bi-level or tri-level is selected.
Output Configuration menu flow
Resolution and Refresh Rate submenu
While this submenu is displayed, rotate the horizontal Adjust (
[
) knob to select
one of the available resolutions, or rotate the vertical Adjust ({) knob to select one
of the available refresh rates. The resolutions and refresh rates are listed in the
following table.
Resolution
Refresh Rates
24 Hz 50 Hz 59.94 Hz 60 Hz 72 Hz 96 Hz 100 Hz 120 Hz
640 x 480 X X X X X X
800 x 600 X X X X X X
852 x 480 X X X X X
1024 x 768 X X X X
1024 x 852 X X X X
1024 x 1024 X X X
1280 x 768 X X
1280 x 800 X X X
1280 x 1024 X X
1360 x 765 X X
1360 x 768 X X
1365 x 768 X X
1366 x 768 X X
1365 x 1024 X X
1400 x 1050 X X
1440 x 900 X X X
1600 x 1200 X X
1680x 1050 X