Instruction Manual

Firmware Update Guide, cont’d
MGP Series • Firmware Update Guide
B-8
PRELIMINARY
Updating using the Firmware Loader
An alternative way to update the MGP’s rmware is to download and run the
Firmware Loader software.
1
. Download the Firmware Loader installer executable file to your computer.
a. On the Extron Web page, click the Download tab.
b
. On the Download Center page, click Software on the left sidebar menu.
c
. Locate the “Firmware Loader” line and click the Download link at the far
right.
d
. Follow the instructions on the download screens to save the installer file
to your computer.
2
. Locate the Firmware Loader executable file in your computer’s file system
and open it.
3
. Follow the instructions on the Installation Wizard screens to install the
Firmware Loader on your computer. The installer program places the
Firmware Loader le, “FWLoader.exe” at the following location:
c:\Program Files\Extron\FWLoader
(If the Extron and FWLoader folders do not yet exist in your Program Files
folder, the installer creates them.)
4
. Access the FWLoader.exe le via your desktop Start menu by making the
following selections:
Start > All Programs > Extron Electronics > Firmware Loader > Firmware
Loader
The Firmware Loader window opens to full screen size, with the Add Device
window displayed in front of it.
5
. On the Add Device window, select the tab for the desired connection type and
enter the parameters for your MGP.
Add Device window tabs