Operating instructions

5-53MLC 52 Series MediaLink Controllers • Serial Communication
Command/response table for SIS commands
Command ASCII Command Hexadecimal Unit response Additional description
(host to MLC) (host to MLC) (MLC to host)
Firmware version, part number, and information requests Query firmware version number Q 51
X1
Show the controller firmware
version
X1
(X.XX).
View part number N 4E 60-744-02
, 60-744-12 , 60-745-02 , or 60-745-12
Show the MLC 52’s part #.
View model name I 49 MLC 52 IR
, MLC 52 RS , MLC 52 IR VC , or MLC 52 RS VC
Show the MLC model name.
Display (projector) power on/off Turn display power on 1P 31 50 Pwr 1 Turn display power off 0P 30 50 Pwr 0 View display power status P 50 Pwr
X2
X2
= display power status:
1 = on 0 = off 2 = display cooling down 3 = display warming up
Example: P 50 Pwr2
The projector/display is cooling down.
Reset Reset switches to factory default
Esc
zXXX 1B 7A 58 58 58 0D ZapX Reset all switches and buttons to
the factory default and erase any codes added by the user.
Front panel lockout (executive mode) Unlock 0X 30 58 Exe0 Unlock front panel.
Lock 1X 31 58 Exe1
Lock front panel.
View front panel lock X 58
X3
Display status
X3
of front panel
lock. 0 = unlocked 1 = locked
Upload firmware Upload firmware {number of data bytes}
Esc
Upload go... Upload a new or different version
Upl of firmware. Upl is displayed
after the upload is complete.