User Guide User Manual

Example 8: Recalling a preset
In the following example, a preset is recalled to become the current configuration. The steps
show the front panel indications that result from your action.
1. Clear all selections: Press and release the Esc button.
2. Select Recall Preset mode: Press and release the Preset button.
1 2 3 15 16
17 18 19 31 32
I
N
P
U
T
S
PRESET
All input buttons with
assigned presets light.
Preset Assigned
Press and release the
Preset button.
The Preset button lights.
No Preset Assigned
3. Select the preset: Press and release the input button or output button for the desired
preset.
1 2 3 4 15 16
17 18 19 20 31 32
I
N
P
U
T
S
C O N T R O L
PRESET ENTER
ESC VIEW
Press and release the Input 1 button.
The button blinks to indicate that this
preset number is selected but not recalled.
The Enter button blinks
to indicate the need to
recall the preset.
4. Recall the preset: Press and release the Enter button. The configuration stored in the
selected memory location is now the current configuration and can be viewed in the
View-only mode (see example 4 on page 48).
1 2 3 4 15 16
17 18 19 20 31 32
I
N
P
U
T
S
C O N T R O L
PRESET ENTER ESCVIEW
All input buttons return to unlit or background illumination.
The Enter and Preset
buttons return to unlit or
background illumination.
Press the Enter button to
recall the preset.
CrossPoint and MAV Series Matrix Switchers • Operation 59