User Guide User Manual

6
4
5
4
Fo
lder where
firmware is
installed
Figure 68. Downloading Firmware Upgrade Files
5. Connect a Windows-based computer to either the Remote RS-232/RS-432 port (see
item h on page 26), the front panel Configuration port (if equipped, see item a on
page 30) or the LAN port (see item i on page 27) of the switcher.
6. If necessary, start the Matrix Switchers Control Program and connect to the matrix
switcher (see Using the Matrix Switcher Control Software, steps 1 through 3,
starting on page 112).
CrossPoint and MAV Series Matrix Switchers • Matrix Software 120