Owner's manual

Chapter 3 • Using the FPC 1000 Front Panel Controller
Extron • Matrix 3200/6400 Series Switchers • FPC 1000 • User’s Manual 3-8
Room Presets Menu
Press any menu title
button at any time
to “escape” without
making changes.
To get here from the Main Menu,
press:
• Presets
• Room
Instruction message appears here >
Use option selections with buttons >
Figure 3-7. Room Presets menu
The Room Preset menu will show room #01, with its 10 presets listed below it
and any virtual outputs to the right. Press Room# to select a different room with
its presets and virtual outputs listed. Room Preset #01 is highlighted in the center
of the screen. Use the speed knob to scroll through the ten selections. The
description at the top is: “Save/Recall Room Presets – Name Presets”. The
instruction message at the bottom is: “Select Room Preset to Save/Recall”. The
buttons at the bottom of the screen are:
Save Recall Delete Global Room# Name
Each of these options will bring up an appropriate menu.
Save
To review or edit, press Save. The menu to allow the name of the selected
preset to be changed. The knob symbol appears over the preset name.
Recall
Press Recall to activate the selected Preset.
The response message is: “Preset recalled”.
Delete
Press this button to delete the selected Room Preset.
Global
To view global presets, press the Global button.
Room#
Press Room# to step through the ten room choices. As each room is selected,
its number and name are displayed above its ten possible presets.
Name
The instruction message is: “Enter Name – Take/ESC to Execute/Abort”.
_______ Rooms cannot be created or reconfigured from the FPC 1000; that must be done
through RS-232 programming. However, rooms can be viewed, activated
(Recalled), deleted or renamed from the FPC 1000.