User Guide User Manual

Prograing Guide, cont’d
Matrix 12800 Switchers • Programming Guide
4-12
PRELIMINARY
Coand ASCII coand
(hot to witcher)
Response
(witcher to hot)
Additional
decription
View tie, gain, ute, preet, le tatu, DSVP, and input tatu
View 16 video ties for
global preset
X(
(All inputs and outputs
shown are virtual.)
EX(
*
X@
*1VC
} X!
n
•
X!
n+1
•
X!
n+2
•...•
X!
n+15
•Vid
]
Show the virtual video input
tied to 16 sequential virtual
outputs of preset
X(
, starting
from output
X@
.
Command description:
Response description:
Preset# * starting output# (StO#) * 1 (= video) VC
Input# (I#) tied to StO#
n
•I#tiedtoO#
n+1
•I#tiedtoO#
n+2
•...•I#tiedtoO#
n+15
•Vid
]
N
1. If you enter
EX(
*
X@
*1VC
}
where
X(
= 0, the switcher returns its current video configuration.
2. Where virtual outputs do not exist, the the BME responds with 000.
Example 1:
E
4*1*1VC
}
01Output:
Response = tied input:
Virtual input 4 tied to virtual output 1
004•128•000•000•000•000•003•001•000•000•000•128•000•001•000•000•Vid
02 03 04 06 07 08 09 10 11 12 13 14 15 1605
Virtual input 128 tied to virtual output 2
No virtual input tied to virtual output 16
Eachpositionshownintheresponseisavirtualoutput.InExample1;left=virtualoutput1,right=virtualoutput16.
The number in each position is the virtual input tied to that virtual output.
Input4istiedtooutput1;input128tooutputs2and12;input3tooutput7;input1tooutputs8and14.Noinputis
tied to outputs 3 through 6, 9 through 11, 13, 15, and 16.
Example 2:
E
3*113*1VC
}
113Output:
Response = tied input:
Virtual input 4 tied to virtual output 113
004•000•000•000•000•005•003•001•000•000•000•000•000•000•000•000•Vid
114 115 116 118 119 120 121 122 123 124 125 126 127 128117
No virtual input tied to virtual output 114
In a 128 virtual inputs x 122 virtual ouputs configuration,
the last 6 virtual outputs do not exist (note 2).
Eachpositionshownintheresponseisavirtualoutput.InExample2;left=virtualoutput113,right=virtualoutput
128. The number in each position is the virtual input tied to that virtual output.
Input4istiedtooutput113;input5tooutput118;input3tooutput119;input1tooutput120.Noinputistiedto
outputs 114 through 117, 121, and 122. Virtual outputs 123 through 128 are not present.
View 16 audio ties for
global preset
X(
(All inputs and outputs
shown are virtual.)
EX(
*
X@
*2VC
} X!
n
•
X!
n+1
•
X!
n+2
•...•
X!
n+15
•Aud
]
Show the virtual audio input
tied to 16 sequential virtual
outputs of preset
X(
, starting
from output
X@
.
Command description:
Response description:
Preset# * starting output# (StO#) * 2 (= audio) VC
I# tied to StO#
n
•I#tiedtoO#
n+1
•I#tiedtoO#
n+2
•...•I#tiedtoO#
n+15
•Aud
]
Each position shown in the response is a virtual output. The number in each position is the virtual input tied to that
virtual output.
N
1. If you enter
EX(
*
X@
*2VC
}
where
X(
= 0, the switcher returns its current audio configuration.
2. Where virtual outputs do not exist, the the BME responds with 000.
Coand and repone table for SIS coand (continued)
N
X(
= Preset # 32 maximum (0 = current configuration)
X@
= Output number 001 – maximum number of outputs
X!
= Input number 000 – maximum number of inputs (000 = untied)