User Manual

Output Config
The Output Config submenu displays and allows changes to be made to the
resolution and refresh rate. Use the adjust knobs to select a resolution and
refresh rate.
Resolution 50 Hz 60 Hz
640x480 X X
800x600 X X
852x480 X X
1024x768 X X
1280x768 X X
1280x1024 X X
1360x765 X X
1365x768 X X
1366x768 X X
1365x1024 X X
1400x1050 X X
480p X
576p X
720p X X
1080i X X
1080p X X
User Presets
The User Preset submenu displays and allows the current settings to be saved as
a preset, or to erase an existing saved preset. Use the Adjust knobs to select the
presets.
Advanced Config
Within this submenu the following settings can be adjusted: auto image
(on or off), top and bottom blanking (set area), filter (on or off), blue mode
(on or off), auto memories (on or off), 2:2 pulldown (on or off), and enhanced
mode (on or off).
Board-specific SIS
™
commands
The ISM VS board can be configured with specific Special Instruction Set
™
(SIS)
commands. The table on page 4 lists some of the ISM VS board-specific
commands.
Refer to the ISM 824 User Guide, available online at www.extron.com for a full
list of definitions and commands.
3
SIS commands table and definitions are on page 4.