Owner's manual
Extron USA - West
Headquarters
+800.633.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
Extron USA - East
+800.633.9876
Inside USA / Canada Only
+1.919.863.1794
+1.919.863.1797 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
68-1123-61
Rev A
04 09
© 2009 Extron Electronics. All rights reserved.
ISM SC Output Board Installation Notes, cont’d
4
Command ASCII
command
(host to
switcher)
Response
(switcher to
host)
Additional description
Video output standard
Set video
output
standard to X\
37*X@*X\# X@Std X\
]
Set video output standard to X\
Where X\ is: 0 = NTSC,
1 = NTSC 0 IRE, 2 = PAL.
View 37*X@#
X\
]
View the video
output standard.
Flicker filter
N
Command is case sensitive
Set flicker
filter level
X@*X4$d X@DvzX4$
]
Specify the flicker filter level to
X4$.
Increment
value
X@+d X@DvzX4$
]
Increase the flicker filter level.
Decrement
value
X@-d X@DvzX4$
]
Decrease the flicker filter level.
View X@d
X4$
]
View the flicker filter level.
Encoder filter
Set encoder
filter level
24*X@*X4$# X@EncX4$
]
Set encoder filter level to X4$
.
Increment
value
24*X@+# X@EncX4$
]
Increase the flicker filter level.
Decrement
value
24*X@-# X@EncX4$
]
Decrease the flicker filter level.
View 24*X@#
X4$
]
View the encoder filter level.
Test pattern
On X@*X2) J TstX@*X2)
]
Select test pattern.
View X@ J
X2)
]
View the test pattern selection.
Full screen
Enable 99*X@*X!*1# X@FulX!*1
]
Output full screen for selected
input.
Disable 99*X@*X!*0# X@FulX!*0
]
Turn full screen off.
View 99*X@*X!#
X2(
]
View the current on/off status.
N
X! = Input number, 0-8
X@ = Output number, 1-8
X2)
= Test pattern, 00 = off, 01 = color bars, 02 = 32x24 crosshatch, 03 = 4x4 crosshatch,
04 = gray scale, 05 = ramp, 06 = safe area, 07 = crop, 08 = 1.33 crop, 09 = 1.78 crop,
10 = 1.85 crop, 11 = 2.35 crop
X2(
= Mode status, 1 = on, 0 = off
X4$
= Filter value, 0-3