Operating instructions

Software-based Confi guration and Control, cont’d
DVCM 50 • Software-based Confi guration and Control
5-20
PRELIMINARY
The following window opens:
Extron’s Firmware Loader window
3. Click Upload. The following prompt opens. Click OK.
Firmware Update fi le selection prompt
4. On the Upload File from... window, locate and select the new fi rmware fi le.
Firmware fi les are extracted to the following location:
c:\Program Files\Extron\Firmware\DVCM 50\####vxxx.s19
where # is an alphanumeric character and vxxx is the fi rmware version
number.
Firmware update fi les have a .s19 extension; make sure that the “Files of type“
fi eld is set to *.s19.
Upload fi le from... window
5. Click Open. The fi rmware update fi le is uploaded to your MLC. During the
process, the Firmware Loader window indicates the progress of the upload.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. [phone]
Fax [phone]
[e-mail]