Operating instructions
3-13
DVCM 50 • Confi guration and Operation
PRELIMINARY
Locking the Front Panel (Executive Mode)
To prevent access by unauthorized users, or accidental button presses to issue
unwanted commands to devices, the front panel controls can be locked using
executive mode. When the DVCM 50 is in executive mode, all front panel functions
are locked, so that pressing the buttons has no effect.
To enable executive mode, press and hold the Tuner W and X buttons
simultaneously for 5 seconds. When the DVCM enters executive mode, the
DVD and VCR LEDs light and remain lit.
DVD & VCR CONTROL
TUNER
Tx
DVD VCR
CONFIG
DVCM 50
PLAY NEXT/FWD PAUSE STOPPREV/REW
ENTER
TITLE MENU
TV/VCR
Buttons for executive mode: press and hold for 5 seconds
To exit executive mode, press the same two buttons again, holding them for
5 seconds. The DVCM 50 reverts to its last operating mode prior to entering
executive mode.
•
•
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de