User Manual

the LED is not lit, the connection speed is 10 Mbps.
h
Link LED — A green LED indicates that the unit is connected to an active network.
i
Act (Activity) LED — A yellow LED lights to indicate that data is being sent or
received.
Resetting the Unit
There are five reset modes available by using the Reset button (
b
) on the front panel. The
Reset button is recessed, so use of a pointed stylus, ballpoint pen, or Extron Tweeker is
suggested.
CAUTION: Review the reset modes carefully. Use of the wrong reset mode may result
in unintended loss of flash memory programming, the reassignment of
ports, or a unit reboot.
IPL T SFI244 • Installation and Operation 9