User`s manual

IPL T SF Series • Specications, Part Numbers, and Accessories
A-3
Digital inputs
Input voltage range ........... 0 to 24 VDC, clamped at +30 VDC
Input impedance ............... 28k ohms
Programmable pullup ...... 2k ohms to +5 VDC
Threshold low to high ...... Programmable range: 100 mV to 24 VDC,
default = 2 VDC
Threshold high to low ...... Programmable range: 100 mV to 24 VDC,
default = 1 VDC
Digital outputs ............................... 250 mA sink from 24 VDC max.
Analog inputs ................................ 12 bit A/D, 0 to 24 VDC
Pin configurations ......................... 1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = GND
IR/serial— IR/S control interface — IPL T SFI244 only
Quantity/type ............................... 4 IR or serial
Connectors ..................................... (1) 3.5 mm captive screw connector, 8 pole
IR output carrier frequency ......... 30 kHz to 1 MHz
Pin configurations ......................... Pins 1, 3, 5, 7 = S 1, S2, S3, S4
Pins 2, 4, 6, 8 = GND
IR learning carrier frequency ....... 30 kHz to 1 MHz
IR learning capture distance ........ 2" (5.1 cm) to 12" (30.5 cm) from the front
panel
General
Power .............................................. Supplied by an included external power
supply
External power supply ................. 100 VAC to 240 VAC, 50/60 Hz, external;
to 12 VDC, 1 A, regulated
Power input requirements ........... 12 VDC, 0.5 A
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Mounting
Rack mount ........................ Yes, with optional 1U, 9.5” deep rack shelf
kit, part #60-190-01 (RSU 129); or 1U, 3.5”
deep VersaTools
®
rack shelf kit,
part #60-190-20 (RSF 123)
Furniture mount ................ Yes, with optional under-desk mounting
kit, part #70-212-01 (MBU 123)
Pole mount ......................... Yes, with optional mini pole mount kit,
part #70-217-01 (PMK 100)
Enclosure type ............................... Metal