User`s manual

IPL T SF Series • Communication and Control
Communication and Control, cont’d
4-28
Command ASCII (Telnet) URL Encoded (Web) Response Stream files via Telnet or RS-232
Load file to user flash memory
24 28
E
+UF, filesize, filename
}
raw unprocessed data from the file up to filesize Up1
}
Retrieve file from user flash memory
28
E
filename SF
}
responds with a 4 bytes filesize and raw unprocessed data from the file
Stream files via port 80
Load file to user flash memory
Use a POST on port 80, followed by the delimited data to be written to the flash file memory
Retrieve file from user flash memory
Send a page GET on port 80 followed by: WSF|+ responds with raw, unprocessed data in file (e.g. http://192.168.254.254/mypage.html?cmd=WSF|)
Re-map port designations
Set Telnet port map
24
E
port#MT
}
Wport#MT|
Pmtport#
]
Reset Telnet port map
24
E
23MT
}
W23MT|
Pmt00023
]
Disable Telnet port map
24
E
0MT
}
W0MT|
Pmt00000
]
Read Telnet port map
24
E
MT
}
WMT|
port#
]
Set Web port map
24
E
port#MH
}
Wport#MH|
Pmhport#
]
Reset Web port map
24
E
80MH
}
W80MH|
Pmh00080
]
Disable Web port map
24
E
0MH
}
W0MH|
Pmh00000
]
Read Web port map
24
E
MH
}
WMH|
port#
]
Set Direct Access port map
24
E
port#MD
}
Wport#MD|
Pmdport#
]
Reset Direct Access port map
24
E
2001MD
}
W2001MD|
Pmd02001
]
Disable Direct Access port map
24
E
0MD
}
W0MD|
Pmd00000
]