User`s manual

IPL T SF Series • Communication and Control
Communication and Control, cont’d
At this point the driver is populated with unlearned functions.
To learn driver functions:
1. Select those functions that are to be learned (see
figure 4-19). Then begin a learning session by pressing the
Learn toolbar button. A series of messages and windows
will guide you through the “learn” process, providing
instruction on how to aim the remote, what button to press
and when to release the button.
2. Save the driver by selecting File > Save, or you can add or
learn new functions.
Figure 4-19 — Selecting driver functions
For more details about IR learning, refer to the IR Learner
Software’s help file.
Programmer’s Guide for the Telnet and Web
Browser
Using the command/response table
The following are either Telnet (port 23) or Web browser
(port 80) commands. There are some minor differences when
implementing these commands via Telnet or via URL encoding
using a Web browser. All commands listed below will work
using either connection method, but due to some limitations of
the Web browser, the encapsulation characters are modified to
make sure that the Web browser will properly handle them. All
examples in the command/response table shows the proper
implementation in a Telnet or Web browser session.
4-16