User`s manual

IPL T SF Series • Communication and Control
Creating a driver with the IR Learner software
In order to use your third-party remote device with the
IPL T SFI244, the functions of your third–party driver must be
“learned” by the IPL T SF unit. In other words, you must create
a driver for your remote control device. You have the option
of creating a new, custom driver or manipulating an existing
driver. Both can be accessed or created through the IR Learner
software.
To create a driver for your remote control device:
1. Launch the IR Learner software application. The
application window appears; there are no open drivers.
2. Create a new or empty driver by selecting File > New. A
driver document is created, and its Header tab is selected.
Figure 4-18 — Creating a new driver
3. Edit the Header fields (figure 4-18), the most important
of which is Type. The driver is populated with a default
set of commands according to the selected device type. A
device type of “Other” creates an empty driver with no
functions.
4. Add functions by pressing the Add button in the toolbar.
N
User-definable functions may be added to the driver. The
names and ordering of user-definable functions may be
changed at any time by double-clicking on the function
to be renamed. The names and ordering of any default
functions cannot be altered.
4-15