User`s manual

IPL T SF Series • Communication and Control
Communication and Control, cont’d
4-12
C
File names must end with an .eml extension.
N
Due to the 7 character limit for full file names, it’s advised
that you use numeric titles (e.g., 1.eml, 24.eml). Numeric
titles reduce the characters of the file name, and assist in
keeping the alert files organized. However, alphabetical
titles are permitted.
To nalize your new e-mail alerts within the Web server, do the
following:
6. Obtain your gateway IP address from your system
administrator.
7. Click System Settings on the menu on the left side of the
window.
8. Within the System Settings screen (gure 4-9) place the
gateway IP address into the Gateway IP Address eld.
Sending an e-mail alert through Telnet
To complete the process of sending an e-mail alert, you must
send it through a Telnet session and receive conrmation. To do
so:
1. Open a Telnet session. For instructions on how to do this,
see “Accessing and using Telnet” later in this chapter.
2. Use the “Send e-mail” SIS command to send the alert to
the e-mail address of a numeric mailbox (see gure 4-14).
Refer to the “Programmer’s Guide for the Telnet and Web
Browser” later in this chapter for specic command code.
For example, the code for sending an alert from the 4th numeric
mailbox would be
Esc 4 SM
}
For detailed information on creating monitoring and scheduling
scripts and software, see the GlobalViewer
®
Software User’s Guide.
Upgrading the firmware
Firmware upgrades become available as improvements are
made to the versatility and functionality of the IPL T SF
interface. These upgrades are available for download from the
Internet.
C
The firmware file you select to upload must have the
extension “.S19”. Uploading the incorrect file may
cause your unit to stop working.