User`s manual

IPL T SF Series • Introduction
The IPL T SF interfaces ship with an external, desktop, 12 VDC,
1A power supply (Extron part #28-071-01), that accepts
100-240 VAC input.
Features
Distributed system architecture — A decentralized architecture
ensures fault-tolerance throughout the system and stand-
alone reliability.
IR remote control — Infrared remote control allows “learning”
of commands to control A/V devices.
Easy component configuration — Using the GlobalViewer
®
software allows point-and-click component conguration
and control.
High speed — Provides constant high speed data throughput,
with a 6 Mbit/second transfer rate.
User customizable — Tailor the on-board Web pages with
advanced programmability, e-mail alerts, and storage to
suit your needs and requirements. You may also develop
your own Web pages using the GlobalViewer application
software.
Direct port access — Use existing software programs to control
a device that has no Ethernet support. Any existing
Extron product with a serial control port can be interfaced
with a LAN.
Built-in multilevel security — User controls access to the
devices attached to the interface. Two levels of password
protection provide appropriate security.
Easily connected — Serial ports on 3.5 mm, captive screw
connectors, and RJ-45 male auto-sense 10/100 Mbs
Ethernet LAN connection.
I/O ports — Can be used to sense when a switch or relay has
been activated (input). Can also be used to activate
external relays for power, screens, or projector lift controls
(output).
IR ports (SFI244 only) — Allow control of up to 16 devices, with
four IR emitters per port.
1-3