User`s manual

IPL T CR48 • Communication and Control
Communication and Control, cont’d
4-20
Command ASCII (Telnet) URL Encoded (Web) Response
File Commands Stream files via port 80
Load le to use ash memory
Use a POST on port 80, followed by the delimited data to be written to the ash le memory
Retrieve le from user ash memory
Send a page GET on port 80 followed by: WSF| {responds with raw, unprocessed data in le} (e.g., http://192.168.254.254/mypage.html?cmd=WSF|)
Stream files via Telnet
Load le to user ash memory
24 28
E
+ UF, filesize, filesize
}
{raw unprocessed data from the le up to lesize} Up1
]
Retrieve le from user ash memory
24 28
E
filename SF {responds with a 4 byte lesize and raw unprocessed data from the le}
Re-map port designations
Set Telnet port map
24
E
{port#}MT
}
W{port#}MT|
Pmt{port#}
]
Reset Telnet port map
24
E
23MT
}
W23MT|
Pmt00023
]
Disable Telnet port map
24
E
0MT
}
W0MT|
Pmt00000
]
Read Telnet port map
24
E
MT
}
WMT|
{port#}
]
Set Web port mapt
24
E
{port#}MH
}
W{port#}MH|
Pmh{port#}
]