User`s manual
IPL T CR48 • Communication and Control
Communication and Control
X1! = Unit version number
X1@ = Name is a text string of up to 24 characters drawn from the
alphabet (A-Z), digits (0-9), and/or a minus sign/hyphen (-).
No blank or space characters are permitted as part of a name.
No distinction is made between upper and lower case. The rst
character must be an alpha character. The last character can not
be a minus sign/hyphen.
X1# = Set local date and time format (MM/DD/YY-HH:MM:SS,
e.g., 06/21/02-10:54:00)
Read local date and time format (day of week, date month year
HH:MM:SS, e.g., Thu, 20 Feb 2003 18:19:33)
X1$ = IP address (xxx.xxx.xxx.xxx); leading zeros in each of four elds
are optional in setting values, and are suppressed in returned
values.
X1% = Domain name (e.g., extron.com, icia.org)
X1* = Hardware (MAC) address (xx-xx-xx-xx-xx-xx)
X1( = Subnet mask (xxx.xxx.xxx.xxx); leading zeros in each of four
elds are optional in setting values, and are suppressed in
returned values.
X2@ = Status: 0 = working; 1 = fail
X2# = Priority status for receive timeout: 0 = priority set to Send Data
String command parameters; 1 = priority set to Congure rcv
timeout command parameters.
X3# = Password: maximum length of 12 characters and no special
characters.
N User password cannot be assigned if no administrator
password exists and returns E14. If an admin password
is cleared, then the user password is removed too.
X3$ = Daylight saving time: 0 = off/ignore; 1 = on (use in northern
hemisphere)
X3% = Event number: range = 0 - 99 (Max.)
X3^ = Event buffer: 0 = receive; 1 = user (absolute); 2 = user (relative); 3
= NVRAM
X3& = Event buffer offset: range = 0 - MaxBufferSize
X3* = Event data size: b = bit; B = byte (8 bit); S = short (16 bit);
L = long (32 bit)
N This parameter is case sensitive.
4-12