User`s manual
IPL T CR48 • Communication and Control
Figure 4-7 — Email alerts screen
N Due to the 7 character limit for full file names, it’s
advised that you use numeric titles (e.g., 1.eml, 24.eml).
Numeric titles reduce the characters of the file name,
and assist in keeping the alert files organized. However,
alphabetical titles are permitted.
To nalize your new e-mail alerts within the Web server, do the
following:
6. Obtain your gateway IP address from your system
administrator.
7. Click System Settings on the menu (gure 4-4) on the left
side of the window.
8. Place the gateway IP address into the Gateway IP Address
eld.
Sending an e-mail alert through Telnet
To complete the process of sending an e-mail alert, you must
send it through a Telnet session and receive conrmation. To do
so
1. Open a Telnet session. For instructions on how to do this,
see “Accessing and using Telnet” later in this chapter.
2. Use the “Send email” SIS command to send the alert to the
e-mail address of a numeric mailbox (see gure 4-7). Refer
to the “Command/response table for Simple Instruction
Set (SIS) commands” later in this chapter for specic
command code.
For example, the code for sending an alert from the 4th numeric
mailbox would be Esc 4 SM}
4-7