User`s manual
IPL T CR48 • Communication and Control
Communication and Control, cont’d
Figure 4-6 — Web server passwords screen
4. Once passwords have been set, you will be required to
enter a password (gure 4-2) whenever you log on to
the unit.
N To clear a password, enter a single space, repeat the
entry, and click the Submit button.
N If there is no administrator password, your password
will not be saved.
Editing and adding e-mail alerts
If you have created scheduled events or monitoring tasks on
the IPL T CR48 interface, you can write an e-mail alert with
a message corresponding to that event or task (e.g., a timer
notication indicating it’s time to replace a projector light bulb).
The e-mail alert can notify up to eight recipients at one time.
To edit notication e-mail addresses from the Email Alerts page:
1.
Click Email Alerts on the menu (on the left side of the
window) and the Email Alerts screen (gure 4-7) is
displayed.
2. Click the Edit button to go into edit mode.
3. Add, update, or change the IP address and domain name
of your mail server under Email Settings.
4. Click the Save button to keep changes.
5. Click on the Edit buttons to independently edit each e-mail
address and le name.
a. Enter the e-mail address of the alert recipient in one of
the numeric mailboxes under E-mail Address.
b. Enter the name of the le containing the alert message
under File Name.
c. Click the Save button to keep changes to recipient
e-mail addresses and le names.
C File names must end with a .eml extension.
4-6