User`s manual
IPL T CR48 • Communication and Control
2. Make changes to the IP settings or Date/Time settings, as
necessary.
3. Click the Submit button to enter the changes, or click the
Cancel button to revert to the previous settings.
4. Click Port Settings on the menu (on the left side of the
window) and the Port Settings screen (gure 4-5) is
displayed.
Figure 4-5 — Web server port settings screen
5. Select the desired port and make changes to the port
settings, as necessary.
6. Click the Submit button to enter the changes, or click the
Cancel button to revert to the previous settings.
Setting and changing your passwords
For security reasons you may want to set passwords initially, or
change passwords either periodically or on a scheduled basis. If
passwords have been set, you must log on as an administrator to
change passwords.
To set or change the passwords:
1. Click Passwords on the menu (on the left side of the
window) and the Passwords screen (gure 4-5) is
displayed.
2. Enter the passwords for administrator and/or user, then
re-enter the same passwords to conrm. Passwords
should have a minimum of 4 characters and a maximum of
12 characters.
3. Click the Submit button to enter the changes, or click the
Cancel button to revert to previous settings. If elds are
blank, no passwords have been assigned.
4-5