User`s manual

IPL T CR48 • Installation and Operation
2-5
Rear Panel Features and Cabling
All connections, including power, input and output, and control,
are on the back panel of the IPL T CR48 interface.
Figure 2-4 — IPL T CR48 interface back panel
Power
a Power connection — Plug the external 12 V power supply
into this connector. The power supply is included with the
unit.
C
When connecting the power supply, voltage polarity
is extremely important. Applying power with
incorrect voltage polarity could damage the power
supply and the interface. Identify the power cord
negative lead by the ridges on the side of the cord.
Figure 2-5 — Power connector wiring
N
Do not tin the stripped power supply leads before
installing the captive screw connector. Tinned wires are
not as secure in the captive screw connectors and could
pull out.
LAN
POWER
12V
0.5A
00-05-A6-00-00-01
INPUT
RELAY
21 3 4 5 6 7 8
1 2 3 4
1
32 4
5
6
7
SECTION A–A
Ridges
Smooth
Power Supply
Output Cord
A A
3/16”
(5 mm) Max.