Setup guide

Extron USA - West
Headquarters
+800.633.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
Extron USA - East
+800.633.9876
Inside USA / Canada Only
+1.919.863.1794
+1.919.863.1797 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
© 2009 Extron Electronics. All rights reserved.
TLP 700MV Setup Guide, Continued
Designing the TLP 700MV Interface with GUI Configurator
Install the GUI Configurator software on a
PC and use it to design the interface that will
appear on the TLP 700MV screen.
N
The Extron GUI Configurator software
is on the disk that comes with the
TouchLink Panel and may also be
downloaded (free of charge) from the
Extron Web site (www.extron.com).
For information about downloading
GUI Configurator, consult the TLP 700
Series Reference Manual, which is
also available from the Extron Web site
(www.extron.com).
Open the program by clicking on the desktop
icon or by using Windows Explorer to
navigate to the correct file on your computer.
When the program opens (see the opening
screen in the figure at right), you have an
option of opening an existing project, opening
an existing template, or opening a blank file to
design a completely new interface.
N
Consult the GUI Configurator Help File for information about using GUI Configurator. To open the help file,
click on the Help menu and select Help or press the F1 button on your keyboard.
Configuring the TLP 700MV Interface with Global Configurator 3
Install the Global Configurator 3 software
on a PC and use it to assign functions to the
screen elements that were created with GUI
Configurator.
N
The Extron Global Configurator 3
software is on the disk that comes with
the TouchLink Panel and may also be
downloaded (free of charge) from the
Extron Web site (www.extron.com).
For information about downloading
Global Configurator 3, consult the
TLP 700 Series Reference Manual.
Open the program by clicking on the desktop
icon or by using Windows Explorer to
navigate to correct file on your computer.
When the program opens (see the opening
screen in the figure above), follow the
on-screen instructions to configure the IP
address of the units. Open the project created with GUI Configurator 3 and assign functions to the buttons and
screen graphics and text.
When the functions have been assigned to all screen objects, build the project and upload it to the system's IP Link
unit. For complete information, consult the TLP 700 Series Reference Manual
N
Consult the Global Configurator 3 Help File for information about using Global Configurator 3. To open the help
file, click on the Help menu and select Help or press the F1 button on your keyboard.