User Guide PRELIMINARY Owner's manual

IPL Pro Series • Introduction 3
Network and configuration features
• Global compatibility — The IPL uses industry standard Ethernet communication
protocols, including DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH,
TCP/IP, and UDP/IP.
• Embedded web pages — The IPL embedded web pages include online diagnostics
and monitoring of basic features.
• Remote equipment management — The IP Link Pro connection allows you
to remotely manage, monitor, and control several Ethernet-enabled products such
as projectors, cameras, video conferencing equipment, switchers, and other AV
equipment. The IPL provides support for the following:
• TCP and UDP connections
• Password-protected TCP connections
• Up to eight Ethernet devices at a time depending on the configuration mode
(GCProfessional or GCPlus)
• Connection via IP address or host name
• Multi-level password protection — Allows security to be set based on user roles.
• System asset management — The software/control processor/configured system
allows you to control, monitor, and schedule various functions of devices in the system.
• E-mail notification — The IPL can be set up to send e-mail notifications, such as a
notice that a projector has been disconnected or the projector lamp has been used for
a designated number of hours.
Each IPLProSeries control processor offers up
to 512MB of flash memory for storing Extron
GlobalViewer and user-supplied web pages,
configuration settings, and device drivers.
Data in flash memory is served at a transfer
rate of 6 Mbps (megabits per second).
SDRAM: 512 MB
Flash: 512 MB
PRELIMINARY