User Guide PRELIMINARY Owner's manual

IPL Pro Series • Index 31
Symbols
.eff
downloading the file for a firmware
upgrade 30
file type description 27
.eir
file type description 27
.gc2
file type description 27
.gcplus
file type description 27
.gcpro
file type description 27
.gcz
file type description 27
.gdl
file type description 27
.glta
file type description 27
A
application diagrams 4
C
COM (serial) ports
use and wiring
5-pole COM ports 13
crossover network cable
connector wiring and when
to use 14
CTL Series (Comm-Link) cables
Comm-Link cable diagram and
use tips 13
D
data connections
troubleshooting 23
default settings
LAN port 14
RS-232 protocol for COM
ports 13
device control connections and
configuration
troubleshooting 23
device control (RS-232,
Ethernet) 5
display control 5
distance
IR learning distance from remote
to IPCP 9
to display or projector 13
drivers
definition of term 24
device driver communication
sheet 13
.eir file type 27
Ethernet drivers 3
IR learning sensor and creating a
device driver file 9
IR or RS-232 driver file,
downloading and using for
control 5
E
eir file type 27
Ethernet drivers
support for 3
F
file names and types
.eff 27
.eir 27
.gc2 27
.gcplus 27
.gcpro 27
.gcz 27
.gdl 27
.glta 27
firmware
determining the firmware
version 29
.eff file 27
firmware update file type 27
locating and downloading 30
updating
updating the main firmware 30
G
gateway IP address
default value 14
resetting to default 17
GC configuration file
*.gc2 27
*.gcplus 27
*.gcpro 27
*.gcz 27
GUI Designer
layout file type
*.gdl 27
layout template file type
*.glta 27
TouchLink touchpanels and 2
Index
PRELIMINARY
PRELIMINARY