User Guide Owner's manual

IPCP 505 • Firmware Updates 79
3. Type the IP address of the IPCP into the browser in the address field and log on to
the internal web page (see the Software-based Configuration and Control section
starting on page 18) or to the optional GlobalViewer web page stored in the IPCP
(see the Global Configurator Help file for details).
NOTE: If GlobalViewer is installed in the IPCP, the GlobalViewer web pages appear
by default.
• GlobalViewer web pages are supported by Internet Explorer, but not by other
browsers. GlobalViewer features may not work properly when viewed via
Navigator, Mozilla
®
Firefox
®
, Google Chrome
™
, or other browser programs.
• To reach the factory default web pages on a
controller that has been set up for GlobalViewer, type
http://<IP address>/nortxe_index.html into the address field of
the browser, substituting the actual IP address for “<IP address>”. For
example, http://10.13.196.42/nortxe_index.html.