Setup Guide
6
IPCP 505 • Setup Guide (Continued)
Extron Headquarters
+1.800.633.9876 (Inside USA/Canada Only)
Extron USA - West Extron USA - East
+1.714.491.1500 +1.919.850.1000
+1.714.491.1517 FAX +1.919.850.1001 FAX
Extron Europe
+800.3987.6673
(Inside Europe Only)
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.299.1800
+971.4.299.1880 FAX
Extron Korea
+82.2.3444.1571
+82.2.3444.1575 FAX
Extron India
1800.3070.3777
(Inside India Only)
+91.80.3055.3777
+91.80.3055.3737 FAX
© 2013 Extron Electronics All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
If you have questions during installation and setup, you can call the Extron S3 Sales & Technical Support Hotline or the
Extron S3 Control Systems Support Hotline.
68-2026-51
Rev. B
07 13
Mounting
Securely mount the IPCP and other devices and attach cables using the preceding wiring section as a guide.
Optional 1U rack shelves (such as the RSU129 1U 9.5" Deep Universal Rack Shelf and the RSB129 1U 9.5" Deep Basic Rack
Shelf) are available for use with the IPCP. Read the instructions and UL guidelines that come with the rack shelf or mounting kit for
installation procedures.
Setup Checklist: How to Proceed With Installation
Get Ready
Familiarize yourself with the features of the IPCP505.
Download and install the latest version of the Extron Global Congurator (GC) software and the latest driver
package (avail able from www.extron.com or on the Extron Software Products Disc.)
Obtain IP setting information for the IPCP from the network administrator.
Obtain model names and setup information for devices the IPCP will control.
Perform Physical Installation
Mount the unit to a rack.
Cable devices to ports on the IPCP505.
Connect power cords and turn on the devices in the following order: output devices (projectors, monitors,
speakers), the IPCP, a PC (for setup) or touchpanel (for control after conguration), then all input devices (such
as DSS and cable boxes).
Configure the IPCP
Connect the PC and the IPCP505 to the same Ethernet subnetwork and use ARP via Telnet, Extron DataViewer,
or a similar application to congure the IPCP for network communication.
Connect any Extron TLP touchpanels that will be part of the system to the same network as the PC and IPCP.
Create a user interface layout for the touchpanels and upload the GUI conguration to each touchpanel. See the
GUIConfigurator Help le for instructions.
Create a new GC project and congure the IPCP505. See the Global Configurator Help le.
Test the system.
Contact information