Owner's manual

20
IN31608 OPERATION MANUAL - REV 1.6 1/4/01 2001 - INLINE, Inc.
Specifications
IN31608 Presentation Switcher
RGBHV Input:
Connectors One set of (5) female BNC connectors per each of the 16 channels
Impedance
Video: 75 Ohms
Sync: High Impedance
RGB Level 0.7 Vp-p Nominal
Sync Level 5 V Max.
Coupling
DC coupled. Any input signal DC offset should be limited to ±0.5
VDC to allow for an acceptable signal swing without distortion.
Audio Input
Connectors One 5-pin Phoenix brand captive screw terminal per each of the 16 channels
Impedance High Impedance (10 KOhms)
Level Line Level
RGBHV Output:
Connectors One set of (5) female BNC connectors per each of the 8 channels
Impedance 75 Ohms
RGB Bandwidth (-3dB) 350 MHz
RGB Gain
1.0 ± 5% 75 Ohm terminated (maximum output
voltage is ±3 V unloaded, ±1.5 V 75 Ohm terminated)
Sync Output
1.0 ±5% with high impedance load. 0.5 ±5% 75 Ohm terminated
(maximum output voltage is ±4 V)
Audio Output:
Audio Connectors One 5-pin Phoenix brand captive screw terminal per each of the 8 channels
Audio Impedance 600 Ohms
Gain
1.0 ± 5% with high impedance load, nominal.
Programmable from -96.0 dB to +31.5 dB.
Frequency Response DC to 80 KHz
Genlock In / Loop Out:
Genlock Connectors One set of (2) female BNC connectors
Impedance 75 Ohms
General:
RS-232 Input Port RS-232 at 1200, 2400, 4800, 9600 or 19200 baud, no parity, 8 bit, 1 stop bit
Projector Control Port
RS-232 or RS-485 at 1200, 2400, 4800, 9600, 19200, 38400
baud no parity, odd parity or even parity, 8 bit, 1 stop bit
Power 96 - 260 VAC, 40 to 60 Hz
Size 17"W x 12.2"D x 7"H (excluding mounting flanges)
Weight 20 lbs.
Regulatory Compliance
Safety
UL 1950, 3
rd
Ed.; CE: EN60950-92;
CAN/CSA-22.2 No. 950 3
rd
Ed.
EMI
FCC class A; CE: EN50081-1,
EN55022, EN50082-1