User guide

IN1604 DTP and IN1604 HD Scalers • Reference Information 77
Downloading Updated Firmware
Figure 60. Downloading Firmware from the Extron Website
1. On the Extron website, click the Download tab (
1
).
2. From the left sidebar, click the Firmware link (
2
).
3. Navigate to the IN1604 DTP or IN1604 HD (
3
).
4. Ensure the available firmware version is a later version than the current one on the
device.
NOTE: The firmware release notes provide details about the changes between
different firmware versions. The file can be downloaded from the same page as the
firmware.
5. Click the Download link (
4
) to the right of the desired device.
6. Submit required information to start the download. Note where the file is saved.
7. From the save location, open the executable (.exe) file.
8. Follow the instructions on the Installation Wizard screens to install the new firmware on
the computer. A Release Notes file, giving information on what has changed in the new
firmware version, and a set of instructions for updating the firmware are also loaded.
9. Use Extron Firmware Loader,or the Product Configuration Software (see Update
Firmware on page 54) to upload firmware from the PC to the scaler.