User guide

IN1604 DTP and IN1604 HD Scalers • Reference Information 75
Reference
Information
This section contains reference or supplemental information. Topics in this section include:
• Mounting
• Downloading Updated Firmware
Mounting
Tabletop Mounting
Attach the provided rubber feet to the bottom four corners of the enclosure.
Rack Mounting
The scalers can be mounted into racks with the pre-installed rack ears (see UL Guidelines
for rack mounted devices on page 76). To install the device, install a rack shelf to the rack
and use the provided screws to attach the device to the rack shelf.
Use 2 mounting holes on
opposite corners.
(2) 4-40 x 3/16"
Screws
1U Universal Rack Shelf
Front false
faceplate
uses 2
screws.
1/2 Rack Width Front False
Faceplate
Figure 58. Half Rack Shelf Mounting