User guide

IN1604 DTP and IN1604 HD Scalers • Configuration Software 67
Size and Position Page
The Size and Position page provides three methods of adjusting image output size and
position: graphically, numerically, or automatically with Auto-Image. Click the Size and
Position
icon (see figure 38,
4
on page 58) on the Global Navigation Bar to open the
Size and Position page.
Figure 49. Size and Position Page
To adjust the size and position graphically:
If desired, click the Lock Aspect Ratio check box (see figure 49,
1
) to constrain the
proportions of the output image. With this selected, the horizontal or vertical dimension of
the output will change relative to the change of the other dimension.
1. Click and drag the drag points of the sample image (
2
) to resize the image within the
designated space (defined by the black area in figure 49).
2. Click anywhere inside the sample image (see the blue rectangle with a circle inside in
figure 50) and drag it anywhere within the designated space to reposition the image.
To adjust the size and position numerically:
1. Enter a value or click the Up or Down arrow in the Horizontal Size and
Vertical Size fields (
3
).
2. Enter a value or click the Up or Down arrow in the Horizontal Position and
Vertical Position fields (
3
).
To adjust the size and position automatically:
To automatically adjust these settings, perform one of the following (see Auto-Image on
page 18 for more details on Auto-Image settings):
• Click the Auto-Image button (
4
) to perform a one-time Auto-Image.
• Click the Auto-Image & Fill button (
5
) to perform a one-time Auto-Image and fill
the entire video output (ignores aspect ratio settings).
• Click the Auto-Image & Follow button (
6
) to perform a one-time Auto-Image and to
maintain the aspect ratio of the input signal (ignores aspect ratio settings).